Weld-On #4 - Fast Set Solvent Cement For Acrylics

Weld-On #4 - Fast Set Solvent Cement For Acrylics Weld-On 4 is a water-thin, somewhat flammable cement formulated to quickly develop very clear and high strength bonds for many thermoplastic substrates. The bond is achieved by first softening the surfaces to be joined and then fusing them together with the dissipation of the solvent. The initial bond forms within a matter of minutes and is followed by a significant and continual increase in bond strength over the next several hours. Weld-On 4 may be preferred by some plastic fabricators because it is less likely to leave white marks (commonly called blushing). For similar applications but faster setting cement, Weld-On 3 is recommended. Substrate Recommendations Weld-On 4 is formulated as a blush-resistant cement for bonding acrylic (poly-methyl methacrylate) to itself. It is not recommended for crosslinked acrylic. Bonding Recommendations Weld-On 4 is used extensively in sign fabrication for cementing acrylic letters to flat acrylic presentation panels and trim-capping of cut out acrylic letters. Strong butt joints are made with flat sheets by using the soak method. Weld-On 4 is also widely used in many applications (e.g. fabrication of display and presentation cases, medical equipment assembly, the bonding of plastic containers and pre-forms, and in the manufacture of numerous solvent welded structures and subassemblies using the capillary method.