
Replace greenhouse glazing
Fit new clear multiwall panels to an existing frame. Measure each opening and plan the channel direction and edge profiles.
- Plan for
- Frame openings, thickness, orientation and profiles.

Compare clear solid polycarbonate, clear and bronze multiwall panels, and the profiles that finish their edges.

| Type | Difference & use |
|---|---|
| Solid clear polycarbonate | Solid transparent sheet without internal channels.Viewing panels and fabricated covers. |
| Clear multiwall | Clear panels with internal walls and channels.Greenhouse glazing and panel replacement. |
| Bronze multiwall | A bronze-tinted multiwall option.Covered patios where the tint suits the design. |
| U-profile | Caps an exposed panel edge.The listed profile fits 8 mm panels. |
| One-piece H-profile | Joins adjacent panels.The listed profile fits 8 mm panels; confirm the system. |
A solid clear sheet, without the internal channels visible in multiwall panels. Viewing panels, commercial glazing enquiries and fabricated equipment covers. Listed as 4 x 8 ft sheets in 1/8, 3/16, 1/4, 3/8 and 1/2 in. Select around the actual frame and required performance; the name alone does not establish a safety rating. S1
A clear panel with internal walls and channels. It is a different construction from solid Lexan sheet. Greenhouse panels and glazing or covering projects. 4 x 8 ft is listed in 6, 8 and 10 mm. The 4 x 10 and 4 x 12 ft listings are 8 mm. Clear is the untinted listed appearance; light transmission has not been verified for these SKUs. S1 · S2 · S3
The bronze-tinted multiwall option. Greenhouse, pergola and patio-covering enquiries where a bronze appearance is wanted. 4 x 8 ft is listed in 6 and 8 mm. The 4 x 10 and 4 x 12 ft listings are 8 mm. Choose by a physical sample where colour matters; no shading or heat-reduction figure is established here. S1 · S2 · S3
An end cap for exposed multiwall-panel edges. Planning the edge finish of an 8 mm multiwall panel. Listed for 8 mm panels in a 12 ft length. Do not assume that this same profile fits the 6 or 10 mm options. S1
A joining profile for adjacent multiwall panels. Planning joints between 8 mm multiwall sheets. Listed for 8 mm panels in a 12 ft length. It is a joining component, not evidence that a frame or roof assembly meets a load requirement. S1

Fit new clear multiwall panels to an existing frame. Measure each opening and plan the channel direction and edge profiles.

Choose bronze multiwall where a tinted roof panel suits the space. Include the supporting frame and roof layout in your enquiry.

Use solid clear sheet for a specified viewing panel or cover. Send the finished outline, openings and support details.
Start with a sketch of each opening and identify whether the existing panel is solid or multiwall. For a multiwall replacement, record the sheet thickness, clear or bronze appearance, and the edge and joining profiles already in the frame. Compare those details with the exact listed format before requesting cuts. A full-sheet size does not by itself define the finished panel dimensions. S1 · S2 · S3
The existing brochures identify pergolas and patio coverings as multiwall-panel applications. Bring the overall layout, support arrangement, intended exposure and preferred appearance to the enquiry. Clear and bronze are options to compare visually. Obtain the actual panel and system documentation before choosing thickness, support spacing or fixings; the catalogue is not a roof-design schedule. S1 · S2 · S3
For a clear solid panel, start with the Lexan listing and a drawing of the finished part. Mark openings, hole positions, quantities and the frame or equipment it must fit. If the panel has a protective, security or machine-guard function, provide the required standard and have the supplied grade and completed design checked against it. A general clear-sheet listing does not confirm that duty. S1
Separate the end-cap requirement from the joining requirement on your drawing. The U-profile is listed for exposed edges; the one-piece H-profile is listed for adjoining panels. Both current profiles are clear, 8 mm and 12 ft long. Confirm how the chosen frame accommodates these components and which additional sealing or fastening materials the manufacturer requires. S1
Match panel thickness and profiles to the frame. A material name alone does not establish a structural or safety rating.
Specify what the finished panel must do, then identify its construction. Do not substitute a solid-sheet thickness in inches for a multiwall thickness in millimetres. A clear appearance is not enough to identify the correct product. S1
The range is not a complete matrix of every colour, thickness and length. For example, clear 4 x 8 ft includes a 10 mm option, while the listed bronze 4 x 8 ft stops at 8 mm. Use the individual option rows in the catalogue; longer 4 x 10 and 4 x 12 ft multiwall sheets are currently listed at 8 mm. S1
Choose clear or bronze multiwall, or clear solid sheet, according to the intended appearance and project brief. Photos show the material family but cannot establish exact colour or light transmission. Ask for a physical sample and the supplied grade's optical data if either affects the project. S1 · S2 · S3
Include frame dimensions, supports, profile type, joints, exposure and required performance in the enquiry. The two listed profiles are for 8 mm panels. Ask which components suit a 6 or 10 mm panel instead of assuming the 8 mm profiles will fit. S1
Send finished dimensions with units, quantities, a drawing of openings and holes, and any critical fit requirements. Identify the selected listed sheet and finish. Custom dimensions require a quote; ask about the fabrication method and finished-edge requirements before committing to a cut list. S1
The reviewed sources do not provide a manufacturer handling or storage procedure for these exact SKUs. Request it with your order, including protective-film instructions, transport and storage orientation, and limits on bending or stacking. Do not treat the general brochure description as that procedure. S1 · S2 · S3
No verified fastener spacing, expansion allowance, channel orientation, edge-sealing method or sealant compatibility is supplied in the reviewed documents. Have the chosen panel and profile manufacturer's instructions checked against the frame and intended exposure. Keep those details on the installation plan rather than copying a rule for a different sheet. S1 · S2 · S3
The source set does not identify approved cleaners or a cleaning procedure for the supplied grade or any coating. Obtain the manufacturer's care instructions and confirm cleaner compatibility before use. The same clear appearance does not mean that acrylic, solid polycarbonate and coated panels share every care requirement. S1 · S2 · S3
The 2023 greenhouse flyer shows a 4 x 12 ft, 10 mm panel. Current clear and bronze 4 x 12 ft listings specify 8 mm. A separate product sheet summarises 8 and 10 mm, while the current 4 x 8 ft listings also include 6 mm. This reference follows the current exact options; ask about any older or unlisted combination. S1 · S2 · S3
The brochures contain broad UV, insulation and flame-retardant claims, and the older flyer mentions snow, wind and hail. No manufacturer, exact grade, test report, load table or warranty was supplied to connect those claims to these options. No numerical performance or installation rating is asserted in this reference. S1 · S2 · S3
Download the product guide or the line sheet of sizes, colours and listed options.
Selection information draws on the current listings and the sources below. Historical brochure details need confirmation where identified.
Snapshot reviewed 29 October 2026: nine current product listings and 16 exact listed variants. Source of sizes, finishes, profile types and SKUs. Listing information is not manufacturer certification.
Page 1 visually reviewed because the PDF is image-only. Supports historical application examples and visual construction; size and broad performance claims have limitations noted above.
Open source ↗Page 1 visually reviewed because the PDF is image-only. Shows clear and bronze multiwall, greenhouse/pergola/patio applications and a summary of sheet formats. Exact current variants take precedence over its broad thickness summary.
Open source ↗