Compare white and coloured embossed FRP, matching trim profiles and adhesive for interior wall projects.
| Type | Difference & use |
|---|---|
| White FRP | 0.090 in embossed panels, 4 ft wide; 8–12 ft listed lengths.Longer interior wall runs and standard white finishes. |
| Coloured FRP | Ivory, almond, beige, gray or black; listed 4 × 8 ft.Interior finishes where colour is part of the design. |
| FRP trim | Divider, inside corner, outside corner and end-cap profiles.Panel seams, corners and exposed edges. |
| FRP adhesive | A separate adhesive listing for panel installation.Select around the substrate and product instructions. |
White embossed sheet, 0.090 in thick. Interior wall and ceiling finishes. Four listed lengths: 8, 9, 10 or 12 ft, all 4 ft wide. S1
Ivory, almond, beige, gray or black embossed sheet. Interior finishes where colour is part of the design. Each lists 0.090 in thickness and 4 × 8 ft size. S1
Profiles for panel joints, corners and exposed edges. Finishing transitions around a panel layout. Divider, inside corner, outside corner or end cap. S1
Adhesive listed for FRP wall-panel installations. Bonding as specified for the selected panel and wall substrate. Confirm the actual adhesive and its application instructions. S1
Line a planned wall area with FRP panels. Include service openings and the existing wall substrate.
Choose a trim profile for each junction. Inside and outside corners use different shapes.
Confirm the supplied adhesive and installation instructions before work starts. Match the substrate and required application method.
For a utility-room wall, mark the wall dimensions and openings first. Compare sheet lengths and colours, then locate joints and cutouts on the drawing before requesting a cutting quote. S1 · S2
A wall run with an internal corner, a projecting corner and an exposed end needs different trim profiles. Mark each location separately so your order follows the room layout. S1
For a wall-panel refresh, identify the existing substrate and coating before selecting glue. Send that information with the panel area so compatibility and adhesive quantity can be confirmed together. S1
Confirm the selected panel, substrate and installation system. Required documentation depends on the premises and application.
State whether the finish is for walls or ceilings and describe moisture, cleaning and heat exposure. The brochure lists both wall and ceiling uses, but does not specify the fixing system for either. S1 · S2
The current range has six colours with embossed faces. Use a physical sample for colour matching; photographs and screens are not a colour standard. S1
All colours list 48 × 96 in sheets. White also has 4 × 9, 4 × 10 and 4 × 12 ft options. Compare the layouts against your measured walls; the listing offers custom dimensions and cutouts by quote. S1
List joints, inside corners, outside corners and exposed edges separately. Confirm trim length, colour and fit for the 0.090 in panel before turning those measurements into quantities. S1
Provide the substrate and its existing finish. Obtain the supplied adhesive's current instructions, pack size and coverage to calculate the quantity; the listing does not give those details. S1
Obtain instructions for the actual panel supplied, including storage, cutting, required protection, joint allowances and attachment. These details are not established by the available brochure. S2
Check the actual adhesive instructions for substrate preparation, application method, working conditions and cure time. Do not use a pictured pail as an installation specification. S1 · S2
Download the product guide or the line sheet of sizes, colours and listed options.
Selection information draws on the current listings and the sources below. Historical brochure details need confirmation where identified.
Current product listings and category inventory: six panel colours, FRP Trim and FRP Glue; 8 products and 14 exact listed options. Product descriptions establish listed uses, not technical approvals.
Open source ↗Page 1 visually reviewed. Lists interior decor, wall panels, ceiling panels, FRP glue, trim and CNC services. Broad performance wording has no supporting ratings; pictured adhesive does not establish the current supplied product.
Open source ↗