Custom flat-plate conduit spacers made from HDPE puckboard. Specify the hole pattern, plate dimensions and quantity; pricing is confirmed for your project.
| Type | Difference & use |
|---|---|
| Uniform-hole layout | The same hole diameter repeats across the plate.For a conduit group using the same outside diameter; specify the required clearance. |
| Mixed-diameter layout | Hole diameters vary to match the conduit schedule.For a drawing with more than one conduit size; identify every opening. |
| Compact or larger array | Hole count, rows, columns and plate outline change.Specify the complete pattern and edge distances; do not scale a photo to obtain dimensions. |
The same hole diameter repeats across the plate. For a conduit group using the same outside diameter; specify the required clearance. Send a dimensioned drawing for feasibility and pricing review.
Hole diameters vary to match the conduit schedule. For a drawing with more than one conduit size; identify every opening. Send a dimensioned drawing for feasibility and pricing review.
Hole count, rows, columns and plate outline change. Specify the complete pattern and edge distances; do not scale a photo to obtain dimensions. Send a dimensioned drawing for feasibility and pricing review.
Use a repeated hole pattern to organise parallel conduits for a planned duct-bank layout. Match the spacer to the project drawing before assembly.
Prepare a flat spacer plate for a grouped communications conduit run. Set out each hole from the drawing, including any reserved positions.
Request a plate with different hole diameters where the project drawing calls for different conduit sizes. Identify each opening so the pattern is unambiguous.
Use a repeated hole pattern to organise parallel conduits for a planned duct-bank layout. Match the spacer to the project drawing before assembly. S2
Prepare a flat spacer plate for a grouped communications conduit run. Set out each hole from the drawing, including any reserved positions. S2
Request a plate with different hole diameters where the project drawing calls for different conduit sizes. Identify each opening so the pattern is unambiguous. S2
A hole pattern defines the plate geometry. Your project design defines conduit separation, support intervals and installation requirements. Send that drawing so the spacer can be reviewed against it.
List the actual conduit outside diameter, required hole diameter or clearance, and the quantity of each opening. Nominal conduit size alone does not define the finished hole.
Specify the plate outline, thickness, hole centres, edge distances and units. State whether a spacing dimension is centre-to-centre or the clear gap between conduits. Include any tolerances required by the design.
Include the dimensioned drawing, quantity per plate design, intended use, delivery location and required date. Pricing varies with the dimensions, material thickness, hole pattern and quantity; Supply Kings confirms feasibility, price and timing. S1
Compare the supplied plate with the approved drawing and check the conduit fit. Keep openings free of debris; report damage or a mismatch before installation.
Use the project specification for support intervals, restraint, lifting and installation. The plate layout does not establish a structural rating or the required spacing along a conduit run.
Thickness, colour, grade, tolerances, quantities and timing are agreed by quote. Any required test reports, approvals or application-specific documentation must be identified with the request. S1
Download the product guide and a one-page line card with the details needed for a quote.
Selection information draws on the current listings and the sources below. Historical brochure details need confirmation where identified.
Owner confirmed custom flat plates with holes, made from Supply Kings puckboard, with variable pricing. Confirmed 4 November 2026.
General context for flat HDPE hole arrays used with electrical and communications conduits. Its sizes, intervals, ratings and capabilities are not Supply Kings specifications.
Open source ↗Reference for the flat sheet product form. Manufacturer-specific dimensions and performance claims are not transferred to this product.
Open source ↗